FireBoard Site Syndication http://boardcrafter.com Sun, 05 Sep 2010 14:19:14 -0500 FireBoard 1.0.5RC2 http://boardcrafter.com/components/com_fireboard/template/default/images/english/emoticons/rss.gif http://boardcrafter.com FireBoard Site Syndication http://boardcrafter.com/component/option,com_fireboard/Itemid,0/func,view/catid,2/id,234/#238 Probably but I would put something inbetweento stop that. I thought rubber mainly to try and counteract differences between the +ve and -ve moulds. I was mainly just wondering if I could get enough pressure to form the board using this sort of press. Mon, 30 Aug 2010 07:53:31 -0500 http://boardcrafter.com/component/option,com_fireboard/Itemid,0/func,view/catid,7/id,233/#233 Hi I've been trying to get the file to export as the .xdf but haven't been able to yet only let's me save as the default file extension. Any suggestions what I'm doing wrong? Wed, 11 Aug 2010 15:34:36 -0500 http://boardcrafter.com/component/option,com_fireboard/Itemid,0/func,view/catid,2/id,224/#232 Will do, thanks. Sat, 07 Aug 2010 21:06:26 -0500 http://boardcrafter.com/component/option,com_fireboard/Itemid,0/func,view/catid,4/id,228/#231 It sounds like your printer's drivers are trying to 'help' by adding a margin between each page. There aren't settings in BcD to change that -it just spits it out as one image. You'll need to mess with the properties/settings of your printer. If your current driver does not give you these options you may want to download an alternative driver from the manufacturer. Sometimes the drivers that come with windows are limited. Hope this helps. Sat, 07 Aug 2010 13:27:05 -0500 http://boardcrafter.com/component/option,com_fireboard/Itemid,0/func,view/catid,7/id,94/#230 Yes using a veneer would be a much better way to go if you want the wood look. Anything put on the core would look cloudy through the glass and the epoxy would darken over time. Sat, 07 Aug 2010 13:17:37 -0500